Tenax Ager Color Enhancer is one of the Stone Enhancers and sealers that will revitalize and enhance the color of Natural Stone Surfaces. Use Tenax Ager Color Enhancer on your Natural Stone Surfaces to give the stone a deep, rich appearance and protect the pores from absorbing potentially discoloring liquids that could stain the surface.
DIRECTIONS: This product must be evenly applied on a clean, dry surface. Spread Tenax Ager Tiger evenly with cloth or sponge until the surface no longer absorbs the product. Immediately buff with a clean cloth. Any excess of Tenax Ager Tiger creates superficial glossy and sticky films so any excess must be removed immediately after the application. The drying time is approximately 1 hour. On floor applications please wait 24 hours before walking on the surface. Water repellent in about 24 hours from application.
MATERIAL COMPATABILITY: Tenax Ager is a color and grain enhancer and sealer designed for adding beauty to all sorts of natural stone surfaces including the following materials:
- Marble
- Granite
- Limestone
- Sandstone
- Quartzite
- Travertine
- Agglomerate
- Rosso Verona
1 QUART COVERAGE: The consumption greatly depends on the porosity of the material being treated. Each type of natural stone varies in porosity. Additionally, stones vary in porosity even if they are the same type. The following list gives some general coverage guidelines for some stones.
1 Quart of Product Coverage | ||
---|---|---|
Material | Approximate Coverage | Approximate Coverage |
Honed Stone & Marble | 19-33 m2 | 203-356 ft2 |
Polished Marble & Granite | 28-47 m2 | 305-509 ft2 |
1 Liter of Product Coverage | ||
---|---|---|
Material | Approximate Coverage | Approximate Coverage |
Honed Stone & Marble | 20-35 m2 | 215-376 ft2 |
Polished Marble & Granite | 30-50 m2 | 323-538 ft2 |